About ASAT, Al Shuaa Al Thahabi Hydraulic Repairing
ASAT, short for Al Shuaa Al Thahabi Hydraulic Repairing, is a hydraulic repair and machining workshop in Sharjah Industrial Area 13, UAE. Since 2018 we have provided specialized hydraulic cylinder and pump repairs, precision component overhauls, custom lathe machining, and genuine spare parts, and supported critical earthmoving, industrial, marine, and transport operations with dedicated workshop engineering and responsive field support.
In-House Workshop
Machining & assembly
Pressure Tested
Strict quality protocol
UAE Coverage
All 7 Emirates
ASAT Hydraulic Engineering
Sharjah Industrial Area 13
Since 2018
Founded in Sharjah
4.9★
Google rating from 67 reviews
24 hours
Open every day
15,000+ Sq. Ft.
Workshop in Sharjah Industrial Area 13
Built in the Workshop, Extended to Your Site
Since 2018, ASAT Hydraulic Repairing has been rebuilding the cylinders, pumps and motors that keep the UAE's machinery working. Our standard has stayed the same from the first job: a component should leave our workshop performing to the same specification as it did when it left the factory.
Our heritage is in Sharjah Industrial Area 13. The workshop is where each component is stripped down, machined, resealed and pressure-tested, under the same procedures on every job.
As our clients' fleets spread across all seven Emirates, we extended beyond the workshop. Mobile teams now travel to site to diagnose and repair equipment where it stands, and only the components that need full overhaul are collected for the workshop.
Heritage in Sharjah
Our roots are in Sharjah Industrial Area 13, supporting the emirate’s industrial and transport sectors.
Equipped Workshop
In-house lathe machining, cylinder honing and test benches rated to 350 bar for every component we return.
Mobile On-Site Teams
Field engineers carry diagnostic and repair equipment to site across all seven Emirates.
What Defines Our Service
ASAT Hydraulic Repairing is an engineering service provider established in the UAE. We specialize in comprehensive hydraulic component overhauls, machining, diagnostics, and genuine spare parts supply.
Precision Machining & Honing
In-house turning and cylinder barrel honing to restore exact manufacturer tolerances.
High-Pressure Testing Protocol
Every repaired cylinder, pump, and valve is tested on dedicated hydraulic test benches before dispatch.
OEM-Grade Seals & Materials
Durable, heat-resistant seal configurations designed for extreme UAE operating temperatures.
Comprehensive Sector Support
Serving construction, transport, marine, industrial manufacturing, and piling industries.
ASAT at a glance
| Legal name | Al Shuaa Al Thahabi Hydraulic Repairing |
|---|---|
| Brand | ASAT |
| Founded | 2018 |
| Workshop | Industrial Area 13, near National Paints, Sharjah, PO Box 44457 |
| Hours | Open 24 hours |
| Service area | Dubai, Sharjah, Abu Dhabi, Ajman, Umm Al Quwain, Ras Al Khaimah, Fujairah |
| Services | Cylinder, pump, motor and valve repair, lathe machining, spare parts, on-site repair, power pack repair, steering box repair, radiator service, steering unit, steering rack, holding valve, accumulators, joystick, water pump, pneumatic cylinder |
| Brands we service | Denison, Cat, Eaton, Vickers, Xcmg, Kawasaki, Poclain, Toshiba, Linde, Danfoss, Parker, Hitachi, Nachi, Hyundai, Kubota, Liebherr, JCB, Caterpillar, Komatsu, Volvo, Rexroth, Putzmeister, Schwing |
Precision tolerances and high-pressure hydraulic integrity.
Verified repair procedures for heavy equipment across the Emirates.
Practical Engineering in an Equipped Industrial Workshop
Our UAE workshop is organized for end-to-end hydraulic repairs. From initial teardown and machining to seal replacement and full-pressure testing, all critical procedures are managed within dedicated facility bays.
Equipped to handle earthmoving, industrial, marine, and commercial hydraulic equipment requiring precision repair and pressure verification.
Disassembly & Overhaul Bays
Equipped stations for teardown, degreasing, and detailed inspection of heavy hydraulic cylinders, motors, and assemblies.
Precision Lathe & Machining Area
Turning machinery dedicated to fabricating replacement rods, cylinder glands, pistons, pins, and custom bushings.
Hydraulic Pressure Testing Station
Dedicated test station to cycle components under working hydraulic pressure, validating seal seating and verifying zero internal/external leakage.
Clean Assembly & Seal Fitting Workbench
Controlled bench area ensuring contamination-free fitting of precision seal kits, wipers, O-rings, and valve spools.
A Disciplined Four-Step Engineering Approach
Every hydraulic component entrusted to ASAT follows a methodical four-step quality procedure designed to guarantee repeatable, long-term operational reliability.
- 01
Understand
Consultation & Operating Context
We begin by gathering technical details regarding equipment symptoms, operating pressure, duty cycle, fluid condition, and past failure history.
- Operating pressure & flow review
- Failure mode discussion
- Collection/dispatch scheduling
- 02
Inspect
Teardown & Precision Assessment
Components undergo complete dismantling, thorough cleaning, and micrometer dimensional checks to identify wear, scoring, pitting, or ovality.
- Complete teardown & cleaning
- Dimensional tolerance checks
- Transparent scope & quotation
- 03
Repair
Machining & Skilled Reassembly
Skilled technicians perform lathe turning, barrel honing, rod straightening or re-chroming, and reassembly with OEM-grade seal kits.
- In-house lathe machining
- OEM-spec seal replacement
- Torqued mechanical assembly
- 04
Test
Bench Pressure & Leak Verification
The overhauled unit is mounted onto our hydraulic test station, cycled under working pressure, and verified for zero external or bypass leakage.
- Full working pressure cycling
- Internal bypass & seal check
- Verified performance sign-off
Workshop & On-Site Support Across All 7 Emirates
Whether your heavy equipment is based in a Dubai construction project, an Abu Dhabi industrial facility, or a marine yard in Sharjah, ASAT provides reliable hydraulic servicing throughout the United Arab Emirates.
Coverage Across the UAE
Dubai
Heavy construction, transport fleets & industrial zones
Sharjah
Industrial manufacturing, workshops & logistics hubs
Abu Dhabi
Infrastructure, energy, marine & heavy earthmoving
Ajman
Commercial vehicles, industrial presses & fabrication
Umm Al Quwain
Quarrying, crushing plants & civil works
Ras Al Khaimah
Heavy mining, cement plants & marine equipment
Fujairah
Port machinery, bunkering systems & shipping gear
Central Workshop Overhauls
Our facility is equipped for complete component teardowns, lathe machining, cylinder honing, seal replacement, and test-bench validation for equipment transported from any Emirate.
On-Site Field Diagnostics
Experienced hydraulic technicians travel directly to your job site, yard, or dock to conduct pressure testing, leak inspections, and component dismantling.
Downtime-Conscious Turnaround
We recognize that non-operational machinery halts critical projects. Our workflow prioritizes rapid inspection and responsive overhaul schedules.
Verified Google Reviews
Engineering, Logistics & On-Site Coverage
Answers to the questions we are asked most often about repairs, turnaround and where we work. For anything specific to your machine, contact our engineers directly.
Yes. ASAT is the short name of Al Shuaa Al Thahabi Hydraulic Repairing, the workshop in Sharjah Industrial Area 13 near National Paints.
Since 2018, from the same Sharjah workshop.
Yes. Our engineers work on cylinders, pumps, motors and valves from the major OEM brands, including Rexroth, Parker, Danfoss, Vickers, Caterpillar, Komatsu, Kawasaki and Eaton. If you are unsure whether a component is in scope, send the model number and we will confirm before you move the machine.
Both. Mobile field teams carry diagnostic and repair equipment to site across all seven Emirates. Where a component needs a full teardown, pressure testing or machining, we collect it and return it once it has passed test.
We cover all seven Emirates: Sharjah, Dubai, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain. The workshop is in Sharjah Industrial Area 13, which keeps workshop collection and return quick for most of the country.
It depends on the component. A cylinder reseal or repair is usually 24 to 48 hours, a pump or motor overhaul 3 to 5 days, and a control valve 2 to 4 days. Spare parts depend on stock. These are typical estimates; we confirm the timeline after inspection and before work starts.
Every repaired cylinder, pump, motor and valve is tested on a dedicated hydraulic test bench at working pressure, up to 350 bar for cylinders, and checked for leakage and performance against OEM specification before dispatch.
Both. We supply seal kits, hoses, fittings and pump parts for our own repairs and for customers' maintenance teams.
Let's discuss your hydraulic requirements.
Speak directly with our technical team about your hydraulic cylinders, pumps, custom machining, or urgent site troubleshooting across the UAE.
Technical Telephone Line
+971 58 958 4232Email Inquiries
info@asatuae.comWorkshop Location
Industrial Area 13, Near National Paints, Sharjah, UAE